Product Description

The jump cups are rotomoulded with two zinc-plated steel button mould inserts that slot into a selected keyhole pair and are designed for use with our cavaletti poles (above), the latter providing the breakaway requirement if a horse should apply an excessive vertical load to the stand.

Product Information

The stand height is 1.8 metres; each upright is fabricated from two lengths of steel angle to form a 5 cm square tube with rounded corners and 1.6 mm wall thickness. The keyhole tracking is laser cut in the metal at 50 mm intervals and the upright is then hot-dip galvanised. The uprights slot into a 60 cm × 60 cm × 20 cm high rotomoulded base – that may be water-filled for increased stability.

Submit product enquiry
  • This field is for validation purposes and should be left unchanged.